Multiwavelength switchable fiber laser employing a DMD as tuning element and variable optical attenuator

First published:

Last Edited:

Number of edits:

<!-- START_ABSTRACT --> <p> Multiwavelength switchable erbium-doped fiber laser is demonstrated by using a digital micromirror device (DMD) as an optical filter and wavelength-dependent variable optical attenuator. The spectrum can be switched from single to multiwavelength lasing output by simple adjustment of the DMD reflection pattern. The mode competition in a fiber ring is efficiently suppressed by finely modulating the reflection column to balance the diffraction loss and EDF gain on each wavelength. The results show the 3 dB-bandwidth of multiwavelength lasing signal is less than 0.06 nm and the side mode suppression ratio is greater than 35 dB. The peak power fluctuation is less than 0.8 dB, and the wavelength drift is less than 0.06 nm over 50 min. The multiwavelength generation from the DMD-based tunable fiber laser is stable, flexible and fast. </p> <!-- END_ABSTRACT --> <!-- START_TEMPLATE --> <ul> <li> Source: </li> <li> Tags: </li> </ul> <!-- END_TEMPLATE -->

Backlinks

These are the other notes that link to this one.

Nothing links here, how did you reach this page then?

Comment

Share your thoughts on this note. Comments are not public, they are messages sent directly to my inbox.
Aquiles Carattino
Aquiles Carattino
This note you are reading is part of my digital garden. Follow the links to learn more, and remember that these notes evolve over time. After all, this website is not a blog.
© 2026 Aquiles Carattino
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
Privacy Policy