Connecting Basler cameras to usb hub
Basler cameras, especially the ACE series consume more current that what the USB3 can provide and therefore require a powered HUB. However, not all hubs are the same and not all will work in the same way.
- Logilink USB hub has a small footprint, and is powered at 5V ( example here ). However, if both an ACE and a Dart are connected, the ACE fails to initialize. My presumption is that the Logilink is not managing the power correctly. For example, if the hub is not connected to the external power, it is still on, and the Dart camera is able to switch on without problems.
- Orico has some nice hubs, but they are bulkier (like this ), or they have a switch that must be pressed after every power cycle (like this ). They are also bulkier and harder to integrate.
- I have ordered a Renkforce ( this ) to test. I am still waiting for it to arrive. **They WORK
See also: extending usb cable with amphenol connector
Filed under: Dispertech
Backlinks
These are the other notes that link to this one.
Comment
Share your thoughts on this note. Comments are not public, they are
messages sent directly to my inbox.
Aquiles Carattino
This note you are reading is part
of my digital garden. Follow the
links to learn more, and remember that these notes evolve over time. After all,
this website is not a
blog.